Analog Devices & Circuits May 2018 3rd Sem B.Tech PTU Paper

Download Previous Year PTU University Question  Paper of Analog Devices & Circuits BTEC-301 3rd Sem Batch 2012 Onwards B.Tech PTU May 2018 Question Paper

B.Tech.(Electronics Engg.) (2012 Onwards)

B.Tech.(ECE)/(Electronics & Computer Engg.)/(ETE) (2011 Onwards) (Sem.–3)

ANALOG DEVICES & CIRCUITS MAY 2018 PAPER 

Subject Code : BTEC-301 M.Code : 57583

 

Time : 3 Hrs. Max. Marks : 60

Time : 3 Hrs.                          Max. Marks : 60

INSTRUCTIONS TO CANDIDATES :
1. SECTION-A is COMPULSORY consisting of TEN questions carrying TWO marks each.
2. SECTION-B contains FIVE questions carrying FIVE marks each and students have to attempt any FOUR questions.
3. SECTION-C contains THREE questions carrying TEN marks each and students have to attempt any TWO questions

Analo Devices & Circuits BTEC-301 3rd Sem Batch 2012 Onwards B.Tech May 2018 Question Paper

                              SECTION-A

Q1. Answer Briefly.

a) Which configuration of Bipolar Transistor is called as Emitter Follower? For what purpose it is used?
b) What is an Oscillator? How does it differ from an Amplifier?
c) What are the different types of configurations used in multistage amplifier circuits?
d) Explain the effect of coupling capacitor on low frequency response of BJT amplifiers.
e) What are the Barkhusain conditions of oscillations in electronic systems? What is their significance?
f) What is the Miller Effect?
g) Why do we need three RC networks for a phase – shift oscillator?
h) What are the Physical origins of resistances in hybrid -p1 model of CE Transistor amplifier at high frequencies?
i) What is meant by ‘Cross-over Distortion’?
j) Define T model of a Bipolar Transistor.

                             SECTION-B

Q2. Attempt any FOUR questions.                                                                    5×4=20

2. An amplifier has voltage gain with feedback of 100. If the gain without feedback changes by 20% and the gain with feedback should not vary more than 2%, determine the values of open loop gain A and feedback ratio .
3. What are the different types of negative feedback? Explain each with block diagram.
4. A CE connected amplifier has Ccb = 5 pF, Cbe = l2pF, hfe = 100, hie 1.5 k. Find the input capacitance to the circuit for a circuit collector resistance of l2k.
5. Explain bow device Capacitances plays dominant role in CE Amplifier in high frequency region.
6. Draw and explain the working of push pull class-B Amplifier. What are its advantages & disadvantages?

                                SECTION-C

Q3. Attempt any TWO questions.                              2×10=20


7. In a Transistor Colpitt’s oscillator we have L = 100 micro H, LRFC 0.6mH, C1 = 0.001 micro F, C2=l0 micro Farad Find a) operating frequency b) feedback fraction c) minimum gain to sustain oscillations & Emitter Resistance if Rc = 2.5k Q.
8. Draw and explain the working of R-C phase shift oscillator and also derive an expression for its frequency of oscillations.
9. a) Determine the value of ripple factor in the full-wave rectifier operating at 50 Hz with a 100 F capacitor filter and 100 load.
b) Draw and explain the complementary symmetry amplifier and discuss its advantages.

Analo Devices & Circuits BTEC-301 3rd Sem Batch 2012 Onwards B.Tech May 2018 Question Paper

Get Started

Section a Analog Devices & Circuits BTEC-301 3rd Sem B.Tech May 2018 Question Paper

Which configuration of Bipolar Transistor is called as Emitter Follower? For what purpose it is used?

Bipolar Transistor is called as Emitter Follower.

What is an Oscillator? How does it differ from an Amplifier?

Oscillator and How does it differ from an Amplifier.

What are the different types of configurations used in multistage amplifier circuits?

Types of configurations used in multistage amplifier circuits.

Explain the effect of coupling capacitor on low frequency response of BJT amplifiers.

Effect of coupling capacitor on low frequency response of BJT amplifiers.

What are the Barkhusain conditions of oscillations in electronic systems? What is their significance?

Barkhusain conditions of oscillations in electronic systems and their significance.

What is the Miller Effect?

 Miller Effect.

Why do we need three RC networks for a phase – shift oscillator?

Need three RC networks for a phase – shift oscillator.

What are the Physical origins of resistances in hybrid -p1 model of CE Transistor amplifier at high frequencies?

Physical origins of resistances in hybrid -p1 model of CE Transistor amplifier at high frequencies.

What is meant by ‘Cross-over Distortion’?

Cross-over Distortion.

Define T model of a Bipolar Transistor.

T model of a Bipolar Transistor.

 Analog Devices & Circuits 3rd Sem B.Tech May 2018 Question Paper Click Here

Section B : Analog Devices & Circuits 3rd Sem B.Tech May 2018 Question Paper              

An amplifier has voltage gain with feedback of 100.

An amplifier has voltage gain with feedback of 100. If the gain without feedback changes by 20% and the gain with feedback should not vary more than 2%, determine the values of open loop gain A and feedback ratio.

What are the different types of negative feedback? Explain each with block diagram.

Types of negative feedback.

A CE connected amplifier has Ccb = 5 pF, Cbe = l2pF, hfe = 100, hie 1.5 k. Find the input capacitance to the circuit for a circuit collector resistance of l2k ohm.

CE connected amplifier has Ccb = 5 pF, Cbe = l2pF, hfe = 100, hie 1.5 k. Find the input capacitance to the circuit for a circuit collector resistance of l2k ohm.

Explain bow device Capacitances plays dominant role in CE Amplifier in high frequency region.

Role in CE Amplifier in high frequency region.

Draw and explain the working of push pull class-B Amplifier. What are its advantages & disadvantages?

Working of push pull class-B Amplifier. 

 Analog Devices & Circuits 3rd Sem B.Tech May 2018 Question Paper Click Here

Analog Devices & Circuits BTEC-301 3rd Sem B.Tech May 2018 Question Paper

Get Started https://www.youtube.com/watch?v=UHX6f8TIvX8https://www.youtube.com/watch?v=M_RR6LVICp0https://www.youtube.com/watch?v=mV41CMWonN4https://www.youtube.com/watch?v=s0LVPE0Q3LE&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=14&t=0s

Section c :- Analog Devices & Circuits BTEC-301 3rd Sem B.Tech May 2018 Paper              

In a Transistor Colpitt’s oscillator we have L = 100 micro H, LRFC 0.6mH, C1 = 0.001 micro F, C2=l0 micro Farad Find a) operating frequency b) feedback fraction c) minimum gain to sustain oscillations & Emitter Resistance if Rc = 2.5k Q.

Transistor Colpitt’s oscillator we have L = 100 micro H, LRFC 0.6mH, C1 = 0.001 micro F, C2=l0 micro Farad Find a) operating frequency b) feedback fraction c) minimum gain to sustain oscillations & Emitter Resistance if Rc = 2.5k Q.

Draw and explain the working of R-C phase shift oscillator and also derive an expression for its frequency of oscillations.

working of R-C phase shift oscillator.

Determine the value of ripple factor in the full-wave rectifier operating at 50 Hz with a 100 F capacitor filter and 100 load.

Ripple factor in the full-wave rectifier operating at 50 Hz with a 100 F capacitor filter and 100 load.

b) Draw and explain the complementary symmetry amplifier and discuss its advantages.

Complementary symmetry amplifier and discuss its advantages.

 Analog Devices & Circuits 3rd Sem B.Tech May 2018 Question Paper Contact Us
MY YOUTUBE CHANNEL
JK Smart Classes Upload Lecture for Degree classes like B.TECH,M.TECH in any stream like ECE,EE,ME and Civil Engineering JK SMART CLASSES ER.JASWINDER KUMAR JK SMART LECTURE ER.JASWINDER KUMAR Engineering Classes Upload Lecture for Polytechnic Diploma classes in any stream like ECE,EE,ME and Civil Engineering ENGINEERING CLASSES ER.JASWINDER KUMAR er.jaswinder kumar Senior Lecturer

Leave a Comment