Download Previous Year PTU University Question Paper of EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU April 2013 Paper
B.Tech. (EE-2011 Batch)
EMEC & DC Machines
Subject Code : EE-202 Paper ID : [ A0407]
Time : 3 Hrs. Max. Marks : 60
INSTRUCTIONS TO CANDIDATES :
1. SECTION-A is COMPULSORY consisting of TEN questions carrying TWO marks each.
2. SECTION-B contains FIVE questions carrying FIVE marks each and students have to attempt any FOUR questions.
3. SECTION-C contains THREE questions carrying TEN marks each and students have to attempt any TWO questions
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU April 2013 Paper
SECTION-A
Q1. Write Short Notes on :
a) Why there is need of starters for DC motors?
b) List the main parts of DC machine. What is importance of a commutator?
c) How can we obtain the internal characteristics from external characteristics of a DC shunt generator?
d) State and briefly discuss the principle of electromechanical energy conversion with one simple example.
e) Define winding factors and benefits of short pitched coils.
f) What is the function of compensation winding in a DC machine?
g) If DC motor fails to start when switched on. What could be the possible reasons and remedies?
h) When load is removed, _______ motor will run at the highest speed.
i) Show the energy in magnetic field is expressed as E=l/2mH2=b2/2m
j) Draw schematic diagram of a metadyne generator which behaves as a constant current generator.
SECTION-B
Q2. Attempt any FOUR questions. 5×4=20
2. What is commutations? What causes sparking on the commutator surface and how can it be avoided? Explain.
3. Discuss flow of energy in electromechanical devices via coupling fields to confirm the generating and motoring principles.
4. Classify DC generators. Show VI characteristics of all type of DC generators.
5. Explain why the speed torque characteristic of DC shunt motor is not linear in the high torque region.
6.A 60 KW, 250 V shunt motor takes 16A when running at 1440 The resistance of the armature and field are 0.2 Ohm and 125 Ohm respectively.When hot
a) Estimate the efficiency of the motor when taking 152A.
b) Also estimate the efficiency if working as a generator and delivering a load current of 152A at 250 V.
SECTION-C
Q3. Attempt any TWO questions. 2×10=20
7. (a) What is the percentage saving in feeder copper if the line voltage in a 2-wire dc system is raised from 200 volts to 400 volts for the same power transmitted over the same distance and having the same power loss?
(b) Show that in a string of suspension insulators, the disc nearest to the conductor has the highest voltage across it. (6,4)
8. (a) Describe the Receiving end circle diagram for long transmission lines based on ABCD constants.
(b) Discuss the effect of earth on capacitance of conductors. (6,4)
9. Write short notes on any two of the followings :
(a) Synchronous phase modifiers
(b) Kelvin’s law
(c) Compensation of transmission lines. (2×5)
Expain Why there is need of starters for DC motors.
Main parts of DC machine.
Importance of a commutator.
Obtain the internal characteristics from external characteristics of a DC shunt generator.
Principle of electromechanical energy conversion with one simple example.
Winding factors and benefits of short pitched coils.
Function of compensation winding in a DC machine.
Explain If DC motor fails to start when switched on.
What could be the possible reasons and remedies.
When load is removed, _______ motor will run at the highest speed.
Prove the energy in magnetic field is expressed as E=l/2mH2=b2/2m
Schematic diagram of a metadyne generator which behaves as a constant current generator.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU April 2013 Paper
Commutation and Causes sparking on the commutator surface.
Flow of energy in electromechanical devices via coupling fields to confirm the generating and motoring principles.
Types of DC generators.
Show VI characteristics of all type of DC generators.
Why the speed torque characteristic of DC shunt motor is not linear in the high torque region.
60 KW, 250 V shunt motor takes 16A when running at 1440 The resistance of the armature and field are 0.2 Ohm and 125 Ohm respectively.When hot
Estimate the efficiency of the motor when taking 152A.
Estimate the efficiency if working as a generator and delivering a load current of 152A at 250 V.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU April 2013 Paper
Find percentage saving in feeder copper if the line voltage in a 2-wire dc system is raised from 200 volts to 400 volts for the same power transmitted over the same distance and having the same power loss.
Show that in a string of suspension insulators, the disc nearest to the conductor has the highest voltage across it.
Explain Receiving end circle diagram for long transmission lines based on ABCD constants.
Effect of earth on capacitance of conductors.
Write short notes on
(a) Synchronous phase modifiers
Short Note on (b) Kelvin’s law
Short Note on (c) Compensation of transmission lines.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU April 2013 Paper
MY YOUTUBE CHANNEL
JK Smart Classes Upload Lecture for Degree classes like B.TECH,M.TECH in any stream like ECE,EE,ME and Civil Engineering
JK SMART CLASSES
ER.JASWINDER KUMAR
JK SMART LECTURE
ER.JASWINDER KUMAR
Engineering Classes Upload Lecture for Polytechnic Diploma classes in any stream like ECE,EE,ME and Civil Engineering
ENGINEERING CLASSES
ER.JASWINDER KUMAR
er.jaswinder kumar
Senior Lecturer