EMEC
When load is removed, _______ motor will run at the highest speed.
Show the energy in magnetic field is expressed as E=l/2mH2=b2/2m
Find percentage saving in feeder copper if the line voltage in a 2-wire dc system is raised from 200 volts to 400 volts for the same power transmitted over the same distance and having the same power loss.
Show that in a string of suspension insulators, the disc nearest to the conductor has the highest voltage across it.
Show that in a string of suspension insulators, the disc nearest to the conductor has the highest voltage across it.
Describe the Receiving end circle diagram for long transmission lines based on ABCD constants.
Explain Receiving end circle diagram for long transmission lines based on ABCD constants.
Discuss the effect of earth on capacitance of conductors.
Effect of earth on capacitance of conductors.
Write short notes on of the followings : (a) Synchronous phase modifiers
Write short notes on
Write a Short Note on (b) Kelvin’s law
Short Note on (b) Kelvin’s law
Write a Short Note on (c) Compensation of transmission lines.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU Nov 2016 Paper
Download Previous Year PTU University Question Paper of EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU Nov 2016 Paper
B.Tech. (EE-2011 Batch)
EMEC & DC Machines
Subject Code : EE-202 Paper ID : [ A0407]
Time : 3 Hrs. Max. Marks : 60
INSTRUCTIONS TO CANDIDATES :
1. SECTION-A is COMPULSORY consisting of TEN questions carrying TWO marks each.
2. SECTION-B contains FIVE questions carrying FIVE marks each and students have to attempt any FOUR questions.
3. SECTION-C contains THREE questions carrying TEN marks each and students have to attempt any TWO questions
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU Nov 2016 Paper
SECTION-A
Q1. Write Short Notes on :
(a) What is the significance of coenergy in the torque derivation of an electrochemical energy conversion device?
(b) Define Electric field energy.
(c) What is meant by SPP?
(d) Define Distribution factor & Breadth factor.
(e) Compare lap and wave winding.
(f) Why carbon brushes are used in D.C. machines?
(g) What is the purpose of interpole & compensating winding?
(h) Why differential compound motor is not used practically?
(i) Why series motor can’t be used in belt pulley arrangement?
(j) Define critical field circuit resistance for shunt generator.
SECTION-B
Q2. Attempt any FOUR questions. 5×4=20
2. Explain the principle & working of hysteresis motor.
3. Explain why distributed field winding is employed in a cylindrical rotor machine.
4. Derive emf equation for D.C. generator.
5. Explain a method used for getting a speed more than the rated speed in D.C. shunt motor.
6. Explain the principle & working of cross field generator.
SECTION-C
Q3. Attempt any TWO questions. 2×10=20
7. Draw & explain the load characteristics of D.C. shunt generator & hence show that it is self protecting in nature.
8. Why starters are used in D.C. machines? Explain the construction & working of three point starter.
9. The Hopkinson’s test on two machines gave the following results for full load : Line voltage 250V; line current excluding field current 50A; motor armature current 380A; field current 5A and 4.2A. Calculate the efficiency of each machine. Armature resistance of each machine is 0.02 Ohm. State the assumptions made.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU NOV 2016 Paper
Get StartedSection a EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU NOV 2016 Paper
What is the significance of coenergy in the torque derivation of an electrochemical energy conversion device?Significance of coenergy in the torque derivation of an electrochemical energy conversion device
Define Electric field energy.
Electric field energy.
What is meant by SPP?
Explain term SPP
Define Distribution factor & Breadth factor.
Distribution factor & Breadth factor.
Compare lap and wave winding.
Difference lap and wave winding.
Why carbon brushes are used in D.C. machines?
Explain Why carbon brushes are used in D.C. machines.
What is the purpose of interpole & compensating winding?
Purpose of interpole & compensating winding.
Why differential compound motor is not used practically?
Discuss Why differential compound motor is not used practically.
Why series motor can’t be used in belt pulley arrangement?
Explain Why series motor can’t be used in belt pulley arrangement.
Define critical field circuit resistance for shunt generator.
Critical field circuit resistance for shunt generator.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU Nov 2016 Paper
Section B :EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU nov 2016 Paper
Explain the principle & working of hysteresis motor.Principle & working of hysteresis motor.
Explain why distributed field winding is employed in a cylindrical rotor machine.
why distributed field winding is employed in a cylindrical rotor machine.
Derive emf equation for D.C. generator.
Emf equation for D.C. generator.
Explain a method used for getting a speed more than the rated speed in D.C. shunt motor.
Method used for getting a speed more than the rated speed in D.C. shunt motor.
Explain the principle & working of cross field generator.
Principle & working of cross field generator.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU Nov 2016 Paper
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU nov 2016 Paper
Get Started https://www.youtube.com/watch?v=UHX6f8TIvX8https://www.youtube.com/watch?v=M_RR6LVICp0https://www.youtube.com/watch?v=mV41CMWonN4https://www.youtube.com/watch?v=s0LVPE0Q3LE&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=14&t=0sSection c :-EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU nov 2016 Paper
Draw & explain the load characteristics of D.C. shunt generator & hence show that it is self protecting in nature.Explain the load characteristics of D.C. shunt generator
Show that it is self protecting in nature.
Why starters are used in D.C. machines? Explain the construction & working of three point starter.
Explain Why starters are used in D.C. machines
Construction & working of three point starter.
The Hopkinson’s test on two machines gave the following results for full load : Line voltage 250V; line current excluding field current 50A; motor armature current 380A; field current 5A and 4.2A.
Hopkinson’s test on two machines gave the following results for full load : Line voltage 250V; line current excluding field current 50A; motor armature current 380A; field current 5A and 4.2A.
Calculate the efficiency of each machine. Armature resistance of each machine is 0.02 Ohm. State the assumptions made.Find the efficiency of each machine. Armature resistance of each machine is 0.02 Ohm. State the assumptions made.
EMEC & DC Machines EE-202 4th Sem B.Tech EE PTU Nov 2016 Paper